varioring van staal voor piaggio, vespa en chinese scooters

Varioring steel for Piaggio and GY6

Thickness varioring
2,49

Looking to buy steel variator rings for Vespa, Piaggio Zip and China GY6 scooters cheaply?

Steel limiter rings with a diameter of 20 mm. Fits virtually all Vespa, Piaggio, and China scooters. From the Supertec brand. High-quality and very competitively priced.

Is your scooter going too fast and do you want to dispose of it? Or do you want to tune your scooter but not let it go too fast? Then you can use a variator ring. This is the easiest and cheapest way to limit a scooter.

Which variator ring do I need?

We sell variorings in the following sizes:

  • 2mm
  • 3mm
  • 4mm
  • 5mm
  • 6mm
  • 8mm

What size variator ring should I use on my scooter?

It's difficult to say exactly which variator ring you need. This depends on your current speed and your desired speed. For example: Is your Vespa or Piaggio Zip currently going 40 km/h and do you want it to go 34 km/h? Then you usually need a 3mm variator ring. We recommend ordering several sizes to ensure your scooter doesn't go too fast. Don't want to run into problems on the rollers? We recommend ensuring your scooter reaches a maximum speed of 32 km/h based on GPS.

This variator ring has an inner diameter of 20 mm. Therefore, it's suitable for any scooter with a 20 mm thick variator bushing. This includes all Piaggio and Vespa scooters (both 2-stroke and 4-stroke) and China GY6 scooters. Suitable for:

  • Piaggio Zip
  • Vespa LX
  • Vespa S
  • Vespa Sprint
  • Vespa Primavera
  • Gilera
  • Kymco
  • Peugeot
  • Sym
  • GY6 scooters
To install a variator ring, you must remove the crankshaft nut. To loosen the crankshaft nut, you'll need an impact wrench or a variator lock wrench.

Curious about the installation process? In this free installation video, we show you how to install a variator ring.


Varioring steel for Piaggio and GY6
2,49