Level10 LED turn signals Vespa Sprint/Primavera

Level10 LED turn signals for the Vespa Sprint and Primavera

The most exclusive LED indicators for the Vespa Sprint and Primavera, including free shipping, installation video and installation material.

MEGA monthly offer! Currently you can order the Level10 turn signals for only €139.99 incl. free shipping within the Netherlands. This is the lowest total price on the market!

Including mounting material. No additional mounting material required! The turn signals are plug & play.

LED turn signals Level10 with matrix/flow

There are 2 models of LED indicators from Level10 on the market. The standard version and the version with flow/matrix. These are the runaway LED indicators with start-up show. These are of course also a bit more expensive.

Both models can be ordered from us. Original and very competitively priced. Available from stock!

Installing Level10 turn signals in a Vespa Sprint or Primavera

How do you mount the level10 turn signals in your Vespa? That is very easy. They are supplied including plug & play plugs and mounting material. Note! Turn signal relay at the front always included. We have a free mounting video below, which you can use for mounting. But we will also explain it below:

• Place the Level10 turn signals at the front of the scooter and secure them with the original screw.
• Click the scooter plug onto the turn signal plug and then slide the plug onto the turn signal.
• Now install the long white wire to the remaining wire of both turn signals.
• You connect the white wire to the contact, i.e. the switched positive (12V DC voltage).
• Remove the old turn signal relay and replace it with a 10 watt relay.
• Now remove the tail light and rear turn signals.
• Install the new Level10 turn signals and click the plugs together again (this is for the turn signals).
• You mount the long yellow wire on the remaining plug and pull it through the rubber to the rear light.
• Connect the yellow wire to the daytime running lights of the rear light. This is so that the turn signals always carry red light.
• With an LED rear light there is already a standard plug to plug the yellow wire in. Otherwise you can use a scotch block.
• Retighten everything and test that the daytime running lights work and the turn signals flash at the correct speed.