Feeler gauge

Buy a feeler gauge to adjust the valves of your scooter? Then order this Holex feeler gauge 13-piece of A-quality. Sharply priced and available from stock.

Does your scooter start badly? Or is it time to adjust the valves because you haven't done this in a long time? Then you need a feeler gauge to check the clearance on the valves. This Holex feeler gauge set is of top quality and consists of 13 feeler gauges (already provided with oil) and comes in a handy storage bag. This feeler gauge is suitable for adjusting the valves on almost any scooter, due to the handy sizes that the feeler gauge has. These are the most common thicknesses. The feeler gauge is Made in Germany.

The feeler gauge has 13 feeler gauges, with the following dimensions:

• 0.05 mm
• 0.10 mm
• 0.15 mm
• 0.20 mm
• 0.25 mm
• 0.30 mm
• 0.40 mm
• 0.50 mm
• 0.60 mm
• 0.70 mm
• 0.80 mm
• 0.90 mm
• 1.00 mm

Why adjust the valves on your scooter?

If the valves on your scooter are not set correctly, you may experience the following problems:

• Loss of compression, causing the scooter to start poorly or not at all.
• You have little to no pulling power. You notice this because the scooter does not accelerate well and does not rev up.
• Your fuel consumption is too high. Because the valves are not set correctly, the scooter is consuming an unnecessary amount of fuel.