Bolt Allen brake caliper original Piaggio/Vespa M8X25

Original Allen bolts for securing the brake caliper M8x25 597150

Are your brake caliper bolts rusted, broken or no longer nice? Replace them in time, so that you can still get them loose. For this, use the original Allen bolts in size M8x25. These bolts have OEM code 597150 from Piaggio.

Available from stock + lowest price in the Netherlands!

These OEM 597150 wheel bolts fit the following Vespas:

• Piaggio Zip
• Front wheel Vespa S
• Front wheel Vespa LX
• Front wheel Vespa Sprint iGET (without kickstart)
• Front wheel Vespa Primavera iGET (without kickstart)

2 pieces of Allen bolts in size M8x25. You mount them with an Allen 6. Don't forget to mount washers between them, so that you can tighten the bolts properly and also loosen them easily.

Vespa front rim wheel bolts rusted or stripped?

These wheel bolts are often rusted, loosened with the wrong tools or are tightened so hard that they will not come loose. Replace them in time, because if you can't get them loose you have a big problem! You will have to loosen the front wheel every now and then, for example to change the tire or brake pads.

How do you prevent the Allen bolts from breaking or rusting?

Always use a stainless steel ring between the bolt, so that it cannot rust and distributes the pressure of tightening. This will make it easier to loosen again. Also, apply a small amount of copper grease to the thread of the bolt, so that they do not rust.

Always use the right tools. First a ratchet or something with Allen 6 and then an impact wrench or other tool. Otherwise you run the risk of breaking/stripping the Allen head. Place your Allen bit as far as possible in the bolt and hold it straight in front of it when you loosen it. Left = loose, right = tight.

They come in packs of 5, which is exactly enough for 1 front wheel.