Clutch blocking key Piaggio/Vespa 34mm
Clutch wrench 2-in-1 for locking and loosening the clutch and nut of Vespa and Piaggio scooters
Required for loosening the nut on the coupling or replacing a compression spring (for example mounting a Malossi Multivar).
Loosen the nut of the clutch housing Piaggio/Vespa
If you want to loosen the coupling, you must first loosen the cap 15 nut. However, I only want to do this with an impact wrench/air wrench. Because otherwise the coupling will turn. To block the coupling, you can order this handy blocking key. This key has 2 pins that fit exactly into the holes in the coupling housing. With this you fix the coupling and then you can loosen it with, for example, a ratchet with a socket 15.
Loosen 34mm nut coupling Piaggio/Vespa
If you want to replace the compression spring, because you want to mount a white compression spring from Malossi for example, you also have to replace the 34mm nut. You do this with the handy hexagon. It fits exactly on the nut and with it you can carefully loosen and tighten it. Some people use a bahco, but with that you often damage the coupling and in addition it regularly shoots off because it is a fairly thin nut. So it is better to use the right tool, to prevent damage and problems.
This coupling key fits:
- Vespa LX
- Vespa S
- Vespa Primavera
- Vespa Sprint
- Piaggio Zip
- Piaggio Fly
- Piaggio Liberty
- Other Vespa and Piaggio scooters
Fits 2-stroke, 4-stroke, 2V, 3V and 4V. In short, this clutch lock key fits almost all Piaggio engine blocks.
Total length of the key is 275 mm. Hexagon/Allen: 34 mm Pin distance: 48 mm + Diameter: 6 mm