Flywheel puller 26x1 Piaggio/Vespa 2T and 4T
Universal flywheel puller in size 26mm for Piaggio and Vespa 2-stroke and 4-stroke scooters
Do you want to disassemble the flywheel of your scooter, for example to check or replace the ignition? Then you will really need a flywheel puller. Without this tool you will not be able to disassemble the flywheel without damage.
Suitable for almost all Piaggio 2T and 4T 2V engines.
Never disassemble your flywheel with a hammer
Some people use a hammer or other heavy tools, but that only causes more damage! The flywheel will no longer remain straight and balanced and in addition parts can break off. And why all those risks for a few euros. This flywheel puller saves you a lot of energy, damage and time.
You tighten the flywheel puller into the flywheel, the same way you tighten a bolt. When it is in as far as it will go, you slowly tighten the bolt with, for example, a ratchet or a wrench. With that you push the flywheel puller out and it pushes the flywheel loose from the ignition.
Flywheel tool in size 26x1
Universal in size 26x1. This means that the thread of the flywheel puller has a diameter of 26mm. The thread runs clockwise, and is therefore suitable for almost all Piaggio and Vespa scooters.
Suitable for removing the flywheel from the following scooters:
- Piaggio
- Vespa
- Aprilia
- Gilera
- Malaguti
- Italjet
- Derby
Fits 2-stroke and 4-stroke scooters. Check the thread of your flywheel to be sure if it is also 26mm.