Split pin rear wheel 3.5x40mm universal (eg Piaggio/Vespa)
Split pin large/thick in size 3.50 x 40 mm. Mainly used for securing the rear wheel.
With a split pin you ensure that the rear wheel nut and therefore also the rear wheel can never come off the scooter. Very safe of course. Does your scooter not have a split pin at the rear wheel, but is there a hole here? Then mount this split pin as soon as possible and prevent an accident!
You usually never use a split pin more than once. So are you going to remove the eighth wheel of your scooter? Then order a split pin at the same time. A-quality from the brand Bollard. Same dimensions as the original from Piaggio/Vespa.
Temporary mega action! Order 10 pieces and get 50% discount.
How do you (dis)assemble a split pin?
The installation is incredibly simple. First, remove the old split pin. Push the 2 ends of the split pin inwards so that they can go through the hole in the rear axle. Then, with a tank, pull the old split pin straight out of the hole. If desired, replace the tire or rim and re-install the rear wheel nut firmly on the scooter. Tighten it extra well.
The new split pin is placed in the hole of the rear axle and then you bend the 2 ends outwards. This way it can never slip out. If desired, you can cut the ends a bit if they are too long.
This split pin fits, among others, the rear wheel of:
- Vespa LX
- Vespa S
- Vespa Sprint
- Vespa Primavera
- Piaggio Liberty
- Piaggio Fly
- Piaggio Zip
- Other scooters with split pin at the rear wheel